Tattoo transfer printing paper is a key tool in the process of tattoo art. It transfers design patterns from the paper to the skin, helping tattoo artists accurately replicate patterns during the creative process. Typically, thermal photocopiers are used to transfer the pattern to the transfer paper and then apply it to the skin. However, if you don’t have a thermal copier, you can still use tattoo transfer paper to achieve this. This article will tell you about the steps to properly use the tattoo transfer paper without a thermal copier.
First, you need to prepare the following materials:
Tattoo to print paper
layout
Alkaline soap and water
Soft brush
Clean paper towels
Step 2: Prepare the skin surface Use alkaline soap and water to clean the tattoo skin surface. Make sure the skin is dry before the next step.
Step 3: Prepare the design pattern. Print the design pattern on the ordinary print paper. Note that the pattern must be mirrored flipped to be displayed correctly on transfer.
Step 4: Transfer the design pattern to the tattoo transfer paper Place the tattoo transfer paper on a flat surface and place the design pattern upside down on the surface of the tattoo transfer paper. Gently brush the design pattern with a soft brush to ensure it is completely transferred to the transfer paper.
Step 5: Transfer the design pattern to the skin. Place the transfer paper on the cleaned and dry skin surface, and stick the design pattern upside down to the skin. Wash the tissue with warm water and gently press the wet wipes on the tattoo transfer paper to ensure full contact with the skin. Then, gently grab the corner of the tattoo transfer paper and slowly uncover the transfer paper to ensure that the pattern is completely transferred to the skin.
Step 6: Check the transfer effect gently check the transfer effect. Ensure that the pattern is transferred to the skin intact, with no vague or residual parts. If there is any incomplete area, you can gently wet the skin again and re-paste the transfer paper, and then uncover it again for better results.
Step 7: Wait for transfer drying Wait for the pattern on the transfer paper to completely dry. This usually takes a few minutes. While waiting, be sure not to touch or rub the pattern on the transfer paper to avoid damage or displacement.
Step 8: Once the pattern on the transfer paper is completely dry, you can be ready to start tattoo. Prepare the tattoo equipment and paint you normally use and follow your design pattern.
Step 9: Remove the transfer paper behind the finished tattoo, gently wipe the tattoo area with a cleaning paper towel or wet cloth to completely remove the pattern on the transfer paper.
Step 10: Care for the Tattoo After the tattoo is completed, follow the professional tattoo care guidelines to ensure that the tattoo area remains clean and take care and maintenance as recommended by the tattoo artist.
With these steps, you can successfully use the tattoo transfer paper without a thermal photocopier. Remember that practice and experience are key to mastering this technique, so practice more and communicate with a professional tattoo artist to get better results and skills. Please remember to always keep it hygienic and safe before performing any tattoo operation, and make sure that the tattoo equipment you are using is legal and safe.